
Dr. Rajesh Gupta
Professor
|
U.G |
Heat & Mass Transfer |
|
|
Engineering Thermodynamics |
|
|
Fluid Mechanics |
|
P.G |
Gas Dynamics & Fluid Flow |
|
|
Computational Fluid Dynamics |
|
|
Theory and Design of Heat Exchangers |
|
|
|
|
|
|
|
Organization |
Start Date |
End Date |
Designation |
Nature of Work |
|
MANIT, Bhopal |
August 10, 1994 |
Till to date |
Professor |
Teaching, Research & Development |
|
Name of the Student |
Topic |
Year of Award |
Co-Supervisor (if any) |
|
Dinesh Kumar Soni (133116002) |
Investigation of NOx Reduction Using Water Emulsion in A Methanol-Diesel Blended Diesel Engine |
April 2017 |
NA |
|
Pankaj Dubey (153216001) |
Emission reduction and performance evaluationofDiesel engine using Jatropha biodiesel and Turpentine oil |
January, 2021
|
NA |
|
Avinash Kumar Namdeo (143216007) |
NOx Reduction & Performance Evaluation of Diesel Engine using Linseed Biodiesel Blends with Water |
February, 2022
|
NA |
|
Gopal Kumar Deshmukh (163116010) |
Performance Enhancement of Two-Stroke Gasoline Direct-Injection Engine using High Injection Pressure |
June 2022 |
NA |
|
Manish Kumar Mohit(183116007) |
Study of thermohydraulic performance of miniature heat sinks with fins |
Ongoing |
NA |
|
Ajeet Yadav |
Course work not completed |
Ongoing |
NA |
|
Title |
Sponsoring Agency |
Duration |
Amount |
Co-PI (if any) |
|
Title |
Sponsoring Agency |
Duration |
Amount |
Co-Investigator (if any) |
|
Evaluation of anti-condensation paint |
BHEL, Bhopal
|
April 2008 |
Rs. 80,000.00 |
|
|
Testing of prototype of Crimped pin type heat exchanger |
Shrao Engg Works, Bhopal |
June 2011 |
Rs. 40,000.00 |
|
|
Testing of prototype of L-pin type heat exchanger |
Fitwell Corporation, Bhopal |
Aug 2011 |
Rs. 40,000.00 |
|
|
Technical advice to Madhya Pradesh Bhoj Open University, Bhopal |
Bhoj Open University, Bhopal |
Feb 2012
|
Rs. 10,000.00 |
|
|
Testing of prototype of Crimped pin type air cooler |
JBL, Engineering Pvt Ltd, Bhopal |
Oct 2016
|
Rs. 57,500.00 |
|
|
Testing of prototype of Crimped pin type air cooler |
LVHE Pvt Ltd, Hardwar |
Feb 2017
|
Rs. 69,000.00 |
|
|
Testing of prototype of Crimped pin type heat exchanger |
Shrao Engg Works, Bhopal |
March2020 |
Rs. 69,000.00
|
|
|
Testing of prototype of Crimped pin type heat exchanger |
Bansal Laboratories, Bhopal
|
June 2020 |
Rs. 88,000.00 |
|
|
Testing of prototype of Crimped pin type heat exchanger |
Narbada Electrographites, Bhopal |
Dec 2020 |
Rs. 88,000.00 |
|
|
Vetting of Design and Drawing of tractor trolley 4 Tonne capacity |
G.S. Industries, Narmadapuram (MP)
|
Feb 2023 |
Rs. 35400.00 |
|
|
Vetting of Design and Drawing of two wheeler 5000,5500 liters tanker |
Sadguru Sai Infra World Pvt Ltd, Rewa (MP)
|
July 2023 |
Rs. 59,000.00
|
|
|
Authors |
Title |
Journal |
VOL. NO., PAGE NO |
YEAR |
SCI/ Scopus |
IMPACT FACTOR |
|
Manish Kumar Mohit and Rajesh Gupta |
Numerical investigation of the performance of rectangular micro-channel equipped with micro-pin-fin |
Case Studies in Thermal Engineering
|
v. 32, 101884 |
2022
|
SCIE |
6.268 |
|
Deshmukh, G.K., Rehman, A. and Gupta R. |
High pressure direct fuel injection as a solution for performance enhancement in two-stroke spark-ignition engine |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
|
pp.1-10 |
2021 |
SCIE
|
2.902 |
|
Deshmukh, G.K., Rehman, A. and Gupta R. |
Performance Enhancement of Two-Stroke Spark-Ignition Engine using High-Pressure Fuel Injection |
J. Chinese Society of Mechanical Engineers |
|
2021 |
SCIE |
2.964 |
|
Deshmukh, G.K., Rehman, A. and Gupta, R |
Experimental Investigations of a Compression-Ignition Engine Fuelled with Transesterified-Jatropha BiodieselDiesel Blend |
Mehran University Research Journal of Engineering and Technology |
40(3), pp.474-481 |
2021 |
ESCI |
0.6 |
|
Deshmukh, G.K., Rehman, A. and Gupta, R |
Combustion and Emission Characteristics of a Compression-Ignition Engine fuelled with Transesterified-Jatropha Biodiesel-Diesel Blends |
Intl. J. Renewable Energy Research (IJRER) |
11(2), pp.899-907. |
2021 |
ESCI |
0.299 |
|
Deshmukh, G.K., Rehman, A. and Gupta R. |
Impact of Temperature on the Spray Characteristics of Jatropha Curcas Biodiesel and Diesel Fuel Blends |
Journal of Testing and Evaluation |
49(6) |
2021 |
SCIE |
1.333 |
|
Deshmukh, G.K., Rehman, A. and Gupta R. |
Effect of high-pressure fuel injection on two-stroke spark-ignition engine performance |
Maejo International Journal of Science and Technology |
14(3), pp.261-271 |
2020 |
SCIE |
0.809 |
|
Deshmukh, G.K., Rehman, A. and Gupta R. |
Numerical Simulation on Effect of Spray Cone Angle on Emissions in Diesel-Engine using AVL-FIRE |
International Journal of Engineering and Advanced Technology (IJEAT) |
9(4), pp. 1595-1599 |
2020 |
Scopus |
1.03 |
|
Ikhtedar Husain Rizvi, Rajesh Gupta |
Numerical investigation of injection parameters and piston bowlgeometries on emission and thermal performance of DI diesel engine |
SN Applied Sciences |
3:626 |
2021 |
Scopus |
2.88 |
|
Evaluation of performance and emission characteristics of a diesel engine using split injection |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
42(6), 331 |
2020 |
|
2.2 |
|
|
Dinesh Kumar Soni, Rajesh Gupta, Rahul Kumar Singh |
Temperature, Heat Distribution and Performance Analysis in A Variable Compression Ratio Internal Combustion Engine |
International Journal of Recent Technology and Engineering (IJRTE) |
8(5), pp.4825-4829 |
2020 |
Scopus |
0.675 |
|
Avinash Kumar Namdeo, Rajesh Gupta |
NOx Reduction of CI Engine operated with Flaxseed oil biodiesel emulsions with Water |
International Journal of Advanced Science and Technology |
pp. 944 – 952 |
2019 |
Scopus |
0.251 |
|
Avinash Kumar Namdeo, Dr. Rajesh Gupta |
Performance and Emissions of CI Engine operated with Linseed Oil Biodiesel-Diesel blends under Varied Compression Ratio |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
pp. 871-878 |
2019 |
Scopus |
|
|
Avinash Kumar Namdeo, Rajesh Gupta |
Potential of Linseed oil Biodiesel as fuel for CI-Engines in India |
International Journal of Scientific & Technology Research |
9(2)2510–2515 |
2020 |
|
|
|
Pankaj Dubey and Rajesh Gupta |
Influences of dual bio-fuel (Jatropha biodiesel and Turpentine oil) on single cylinder variable compression ratio diesel engine |
J. of Renewable Energy |
1294-1302 |
2018 |
Sci |
8.634 |
|
Dinesh Kumar Soni and Rajesh Gupta |
Application of nano emulsion method in a methanol powered diesel engine |
Energy |
638-648 |
2017 |
Sci |
|
|
Dinesh Kumar Soni and Rajesh Gupta |
Numerical analysis of flow dynamics for two piston bowl designs at different spray angles |
Journal of Cleaner Production |
723-734 |
2017 |
Sci |
11.072 |
|
Pankaj Dubey and Rajesh Gupta |
Effects of dual bio-fuel (Jatropha biodiesel and turpentine oil) on a single cylinder naturally aspirated diesel engine without EGR |
Applied Thermal Engineering |
1137–1147 |
2017 |
Sci |
6.4 |
|
Pankaj Dubey and Rajesh Gupta |
Study of the performance and emission characteristics for a dual fuel powered single cylinder diesel engine |
Int. J. of Automotive and Mechanical Engineering (IJAME |
Vol. 13, Issue 2 pp. 3373 - 3388 |
2016 |
Scopus |
0.287 |
|
Narendra Kumar Yadav, Rajesh Gupta and Pankaj Dubey |
Emission Reduction by using Linseed & Turpentine Oil Blend as Alternative Fuel in Diesel Engine |
International Journal of Engineering Research & Technology |
5(5), 526-531 |
2016 |
|
|
|
Chetan S.Bawankar and Rajesh Gupta |
Effects of piston bowl geometry on combustion andEmission characteristics on diesel engine: A CFD case study |
International Journal of Research in Engineering and Technology |
5(7), 81-93 |
2016 |
|
7.525 |
|
Dinesh Kumar Soni, Rajesh Gupta, |
Optimization of methanol powered diesel engine: A CFD approach |
J. Applied Thermal Engg |
106, 390-398 |
2016 |
|
6.465 |
|
Dinesh Kumar Soni, Dr. Rajesh Gupta |
Numerical investigation of emission reduction techniques applied on methanol blended diesel engine |
Alexandria Engineering Journal |
55, 1867-1879 |
2016 |
|
6.626 |
|
Dinesh Kumar Soni, Dr. Rajesh Gupta |
Emission Control Using Methanol, Ethanol And Butanol In DieselEngine: A Comparison Through CFD Simulation |
Journal of Mechanical and Civil Engineering |
12(6), 17-23 |
2015 |
|
4.042 |
|
Dinesh Kumar Soni, Rajesh Gupta |
Comparison of performance and emission characteristics of diesel and diesel-water blend under varying injection timings |
International Journal of Engineering, Science and Technology |
7(4), 49-59 |
2015 |
|
7.155 |
|
Abdul Gafoor C.P., Rajesh Gupta |
Numerical investigation of piston bowl geometry and swirl ratio on emission from diesel engines |
Energy Conversion and Management |
101, 541-551 |
2015 |
|
10.4 |
|
Aman Saraf, Anshul Sungra, Rajesh Gupta |
Performance Analysis of an Air Operated Micro-turbine |
Journal of Sustainable Manufacturing & Renewable Energy
|
3, 129-138 |
2015 |
|
2.847 |
|
Manish Rawat, Dinesh Kumar Soni, Rajesh Gupta |
Turbulent Flow over an elliptical Cylinder |
Intl. Journal of Scientific Engineering and Technology |
3, 217-221 |
2014 |
|
7.957 |
|
Mohit Gupta, Rajesh Gupta |
A numerical study of methane-air premixed flame in a diverging micro-channel |
Indian J. App. Research |
3(9), 217-221 |
2013 |
|
6.03 |
|
Manish Rawat, Dr. Rajesh Gupta, Dr. R.M.Sarviya |
High Reynolds number flow overcylinders: A Review”, |
Intl. J. of App. Res. in Engg & Mgmt |
2(6), |
2013 |
|
2.0589 |
|
S. R. Chaurasia, Rajesh Gupta and R.M. Sarviya |
Performance Analysis of a Pulsejet Engine |
Intl. J. Engg Res & Appl
|
3(4), 605-609 |
2013 |
|
5.851 |
|
Rajesh Gupta and Ashish Puriya |
Simulation of non-premixed natural gas flame |
Intl. J. of Science and Research |
2(5), 97-100 |
2013 |
|
1.5411 |
|
Vivek Nema, Rajesh Gupta and A. Rahman |
Cold Flow Simulation in a CI Engine |
Intl. J. Comput. Sci & Engg |
3(1), 9-19 |
2013 |
|
1.331 |
|
Manish Rawat, Dr. Rajesh Gupta, Dr. R.M.Sarviya |
Numerical simulation of flow around an elliptical cylinder at high Reynolds numbers |
Intl. J. Fluids Engg
|
5(1), 29-37 |
2013 |
|
|
|
Rajesh Gupta and Dinesh Soni |
Mathematical Analysis of Inclined Ground Heat Exchanger |
Global Journal of Mathematical Sciences |
5(1), 31-46 |
2013 |
|
0.36 |
|
R. K. Mandloi, Rajesh Gupta and A. Rehman |
Design, Development and Testing of Low Capital and Operational Cost Shrub Cutting Machine |
J. of Rang. Sci
|
1(2), 121-124 |
2011 |
|
|
|
Rajesh Gupta and N.D. Mittal |
Fluid flow and heat transfer in a single-pan wood stove |
Intl. J. of Engg Sci & Technology
|
2(9), 4313-4325 |
2010 |
|
5.155 |
|
Rajesh Gupta and N.D. Mittal |
Pyrolysis modeling in a wood stove |
Intl. J. Engg Sci & Technology |
2(10), 5088-5098 |
2010 |
|
|
|
Holloway, A.G.L. and Gupta, R |
The Influence of Linear Mechanisms in the Adjustment of Sheared Turbulence to Flow Curvature |
J. Phys. Fluids A |
5(12), 3197-3206 |
1993 |
|
4.98 |
|
Title |
Year |
Agency |
Co-Investigator(if any) |
Published/Granted |
|
|
h-index |
i-10 index |
Total Citations |
|
Google Scholar |
9 |
8 |
647 |
|
Vidwan Profile |
9 |
- |
403 |
Detailed Bio-data
